[Advertisement] Photo Interrupter Sensor Guide India

3 Top Photo Interrupter
Manufacturers
Page scroll

Photo Interrupter
Selection Guide
for When Nothing Fits A Detailed Look at Manufacturers Available in India

A discontinued part. An unusual sensing target. A space too tight for standard sizes. When off-the-shelf options run out, you may find yourself turning to a distributor or opening up the previous device to identify the part number used there.

This site takes an in-depth look at photo interrupters from manufacturers whose products are confirmed to be carried by distributors or sales agents in India. Find manufacturers suited to each specific challenge.

[Advertisement]Photo Interrupter Manufacturers
for 3 Specific
Design Challenges

This section looks at three design challenges that standard parts often struggle to address and introduces one manufacturer suited to each. All three are manufacturers whose products are confirmed to be carried by distributors or sales agents in India.

Advertiser Disclosure: We receive compensation from some of the companies listed below. This compensation may affect which companies are included and the order in which they appear.

No Replacement for a Discontinued or Hard-to-Source Part

SHINKOH
ELECTRONICS

SHINKOH ELECTRONICS
Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/en/)
Even Discontinued Parts
from Other Manufacturers
Can Be Recreated

Because SHINKOH ELECTRONICS designs both the emitter and detector in-house, it can reproduce parts with dimensions and characteristics close to the original, helping avoid PCB redesign and recertification.

Get a Near-Custom Fit
to Keep Costs Down

As a specialist optical sensor manufacturer, SHINKOH ELECTRONICS maintains designs spanning 50 years of products.* Its broad current and legacy product range makes it possible to find a near-custom fit without developing a fully custom part, which can help keep costs down.

Sourcing

Where to buy in IndiaLocal distributor (Toshniwal Sensors)
SamplesAvailable

Unable to Reliably Detect Liquid
or Air Bubbles in Tubing

TT
Electronics

TT Electronics
Source: TT Electronics official website (https://www.ttelectronics.com/products/sensors/optoelectronics/fluid-sensors/opb350/)
Arc-Shaped Slots
Hold the Tubing Securely
to Keep the
Sensing Position Stable

Models are available for tube outer diameters of 1.6, 3.2, 4.8, and 6.3 mm, with arc-shaped slots sized to match each diameter, helping keep the sensing position stable.

Detect Liquid, Air Bubbles,
and Tube Detachment
with a Single Sensor

TT Electronics’ fluid sensors have been used in hemodialysis machines and infusion pumps. With an additional decision circuit, the sensor can distinguish liquid presence or absence, passing air bubbles, and the absence of a tube, and can also detect tube detachment.

Sourcing

Where to buy in Indiaelement14 / RS / Mouser / DigiKey
SamplesAvailable

No Standard Part Fits
in a Tight Enclosure

SHARP
Semiconductor Innovation

SHARP Semiconductor Innovation
Source: SHARP official website (https://global.sharp/corporate/news/100924.html)
Ultra-Compact SMD
Fits in the Space Between
the PCB and Mechanism

At just 2.26 × 1.4 × 1.6 mm, its surface-mount design means no leads protrude from the back of the PCB. It fits entirely in the space between the PCB and mechanism, allowing a sensor to be added without changing the enclosure thickness.

Compact Design with
a Narrow Sensing Area
to Detect
Small Objects
and Fine Features

With its 0.12 mm slit width and small sensing area, it can detect the position of small moving parts such as a lens, allowing the flag on the mechanism to be made smaller.

Sourcing

Where to buy in Indiaelement14 / RS / Mouser / DigiKey
SamplesContact for availability
*Source: SHINKOH ELECTRONICS official website, as of September 2026 (https://www.landingpage-synergy.com/p464xnO9/)

Comparison of Capabilities
Across the 3 Manufacturers

SHINKOH ELECTRONICS TT Electronics SHARP Semiconductor Innovation
Gap width range 2–15 mm 2.03–32.0 mm 1.0–10.0 mm
Slit width range 0.2–2 mm 0.076–1.52 mm 0.12–1.8 mm
Mounting method Direct PCB mount / surface mount (reflow) / snap-in connector / screw-mount connector / screw-mount harness PCB mount / panel mount / screw mount / wire leads (24", 26 AWG) / free-hanging PWB through-hole / surface mount (reflow) / snap-in connector / case type with screw holes
Environmental options Dust resistance / drip resistance / visible-light blocking Dust resistance / ambient-light protection Not specified on the official website
Example applications ATMs, analytical instruments, inspection equipment Portable hemodialysis machines, infusion pumps Digital cameras, Blu-ray recorders
Customization Available Available Contact for availability

3 Recommended
Photo Interrupter
Manufacturers
in Detail

No Replacement for a Discontinued
or Hard-to-Source Part

Even Discontinued Parts
from Other Manufacturers
Can Be Recreated
Starting with the Optical Design
SHINKOH ELECTRONICS

SHINKOH ELECTRONICS
Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/en/)
Replacements That
Closely Match the Original
Can Reduce the Need to Redesign
the PCB or Mechanism

SHINKOH ELECTRONICS is a specialist optical sensor manufacturer that also offers emitters and detectors as standalone products, and it can design everything in-house, from element selection to the outer shape. It accepts requests to reproduce discontinued products from other manufacturers. Because it can remake them with dimensions and characteristics close to the original parts, you may be able to avoid redesigning the PCB and mechanism, depending on your compatibility requirements.

Source a Matching Model
from Product Designs
Spanning 50 Years*

SHINKOH ELECTRONICS specializes exclusively in optical sensors and keeps legacy models ready for production. In addition to 115 standard photo interrupter models currently in production**, it can reproduce products using designs spanning 50 years. Because this lets you get a near-custom fit without full customization, it can help keep costs down.

* Source: SHINKOH ELECTRONICS official website, as of September 2026
(https://www.landingpage-synergy.com/p464xnO9/)
** Source: SHINKOH ELECTRONICS official website, product list (transmissive type); compiled from the listed model names,
as of September 2026 (https://www.shinkoh-elecs.jp/products/sensors-interrupter/?lg=en)

Key Photo Interrupters
from SHINKOH ELECTRONICS

Photo Interrupter
KI1138
KI1138Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/products/sensors-interrupter/?lg=en)
Number of models115 (as of September 2026)
Gap width2–15 mm / 14 options
Slit width0.2–2 mm / 8 options
Output typePtr / PIC
MountingDirect PCB mount / snap-in / screw-mount connector / screw-mount harness / surface mount
Selectable featuresDust protection / drip protection / visible-light blocking / 4-direction mounting / wide / compact
Photo Reflector
KR1207
KR1207Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/products/sensors-reflector/?lg=en)
Number of models31 (as of September 2026)
Sensing distanceAnalog 0.5–7 mm / digital 0–32 mm
Emission colorUltraviolet / red / white / infrared
Output typeAnalog voltage / Ptr / PIC / PD
MountingSurface mount / direct PCB mount / connector / screw-mount connector
Selectable featuresTransparent-object detection / color discrimination / high resolution / dust protection / visible-light blocking / UV blocking / compact
Separate-Type
Photo Interrupter
KB1240
KB1240Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/products/sensors-separate/?lg=en)
Number of models20 (as of September 2026)
Sensing distance1–2,000 mm
Ambient light countermeasuresVisible-light blocking / modulated-light method / ambient light tolerance: 50,000 lx (KB3725)
Output typePtr / PIC
MountingHarness / connector / snap-in connector / screw-mount connector / screw-mount harness
Selectable featuresFully dustproof / dust protection / drip protection / long-range / compact / high-retention connector
Actuator-Type
Photo Interrupter
KA1335
KA1335Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/products/sensors-actuator/?lg=en)
Number of models7 (as of September 2026)
Operating position8° / 12° / 13° / 19°
Mounting directionR-side mounting / L-side mounting
Output typePtr / PIC
MountingSnap-in connector / snap-in harness
Selectable featuresTwo lever shapes + custom options available / built-in LED current-limiting resistor / compact / high-retention connector

About SHINKOH ELECTRONICS

SHINKOH ELECTRONICS
Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/en/)

SHINKOH ELECTRONICS is a Japanese manufacturer specializing in optical sensors and has developed, manufactured, and sold optical semiconductor products since its founding. Its products are used in equipment requiring long-term stable operation, such as ATMs, analytical instruments, and inspection equipment. It holds a patent related to transparent-object detection (Japanese Patent No. 6866174) and has used its in-house design capabilities to address sensing challenges that standard products cannot solve. To meet high-mix, low-volume requirements, standard products can be ordered in quantities as low as 100 units, and in-stock items can be shipped in about one week. It has distributors in Asia, including India, and in Europe. It also exhibited at India Electronics Expo 2026 and electronica India 2026.

Company NameSHINKOH ELECTRONICS Co., Ltd.
Established1974
Headquarters Address2-29-30 Minami-kamonomiya, Odawara, Kanagawa, Japan
CertificationISO 9001*
Scope of certification: design and development, manufacture, and sale of optical sensors and products incorporating LEDs and photodetectors, as well as the sale of motors
Sales Network5 locations in Japan, with distributors in India, South Korea, Taiwan, China, Singapore, Germany, France, and Italy, covering 17 countries and regions including the territories served by each distributor.**
Official Websitehttps://www.shinkoh-elecs.jp/en/

* Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/en/technology/)
** Source: SHINKOH ELECTRONICS official website, as of September 2026 (https://www.shinkoh-elecs.jp/en/company/accessmap/#oversea)

If You Cannot Reliably
Detect
Liquid or
Air Bubbles in Tubing

Track Record in Hemodialysis Machines
and Infusion Pumps
TT Electronics

TT Electronics
Source: TT Electronics official website (https://www.ttelectronics.com/products/sensors/optoelectronics/fluid-sensors/opb350/)
Models Sized for Each
Tube Outer Diameter
Help Position
the Tube

Sensor models are available for tube outer diameters of 1.6, 3.2, 4.8, and 6.3 mm. Each model has a slot sized to fit the corresponding tube diameter, so the tube can be positioned at the sensing point, potentially reducing the need for a separate holding fixture. In addition, because the on-state collector current and on/off ratio are specified for each tube diameter, you can assess the expected signal difference with the intended tube before integrating the sensor.

No Separate Sensor Needed
for Air Bubble Detection

The output current has three distinct levels: maximum current with clear liquid, minimum current with dark liquid, and an intermediate level when no tube is present. By setting two thresholds in the decision circuit, both air bubbles and tube detachment can be monitored over a single signal line. Compared with using a separate sensor for air bubble detection, this approach adds no components or wiring and requires no additional mounting area.

Key Photo Interrupters
from TT Electronics

Slotted Switches
OPB120B
OPB120BSource: TT Electronics official website (https://www.ttelectronics.com/products/sensors/optoelectronics/slotted-switches/)
Number of models416 (as of September 2026)
Gap width2.03–32.0 mm
Slit width0.076–1.52 mm
Output typePtr / PIC / PD
MountingDirect PCB mount / wire / connector
Selectable featuresDust protection / visible-light blocking
Reflective Sensor
OPB606A
OPB606ASource: TT Electronics official website (https://www.ttelectronics.com/Products/Sensors/Optoelectronics/Reflective-Sensors)
Number of models92 (as of September 2026)
Sensing distance0.76–762 mm
Emission colorRed / infrared
Output typePtr / PIC
MountingDirect PCB mount / surface mount / wire / connector / snap-in
Selectable featuresDust protection / enhanced performance in dirty environments / sealed mounting / high resolution
Fluid Sensor
OCB350L062Z
OCB350L062ZSource: TT Electronics official website (https://www.ttelectronics.com/Products/Sensors/Optoelectronics/Fluid-Sensors)
Number of models15 (as of September 2026)
Compatible tube outer diameter1.6 / 3.2 / 4.8 / 6.3 mm
Output typePhototransistor / Analog & Logic
MountingDirect PCB mount / wire / PCB with cable
Selectable featuresVisible-light blocking / with calibration circuit

About TT Electronics

TT Electronics
Source: TT Electronics official website (https://www.ttelectronics.com/)

TT Electronics is an electronic components manufacturer headquartered in London, UK, and listed on the London Stock Exchange. Its photosensors are manufactured under the Optek Technology brand, founded in 1968, at facilities in Dallas, Texas, and Juárez, Mexico. Healthcare is one of its key markets, and it has published examples of use in portable hemodialysis machines and infusion pumps. Its products are available from distributors such as element14, RS Components, Mouser, and DigiKey.

Company NameTT Electronics plc
Established1906
Headquarters AddressFifth Floor, One George Yard, London, EC3V 9DF, United Kingdom
CertificationISO 9001 (Juárez plant)
Scope of certification: manufacture of optoelectronics, magnetic and fiber-optic devices and assemblies for commercial markets
Also: ISO/TS 16949, ITAR, RoHS/REACH, ANSI/ESD S20.20-2014
Sales NetworkSales networks span three regions: the Americas, Europe, and Asia-Pacific, with products supplied worldwide through distributors such as element14, RS Components, Mouser, and DigiKey.
Official Websitehttps://www.ttelectronics.com/

If You Cannot Find
a Standard Part
That Fits
in a Tight Enclosure

Ultra-Compact Sizes Developed Through Digital Camera Miniaturization,
Available as Standard Products
SHARP
Semiconductor Innovation

SHARP Semiconductor Innovation
Source: SHARP official website (https://global.sharp/corporate/news/100924.html)
Add a Sensor Without Rearranging Other Components

With compact dimensions of 2.26 × 1.4 × 1.6 mm, it occupies only 2.26 × 1.4 mm of PCB area. Because it is surface-mounted, no leads protrude from the back of the PCB and no through-holes are required, so component placement and routing on the back of the PCB remain flexible.

Detect Small Objects
Inside a Tight Enclosure

Even the ultra-compact models in the Compact type series have a narrow 0.12 mm slit width and small sensing area while providing a minimum collector current of 100 μA, enabling precise detection despite their small size. They can detect small objects even when installed in a narrow gap in the mechanism, so the mechanism does not need to be redesigned to accommodate the sensor.

Key Photo Interrupters
from SHARP
Semiconductor Innovation

Compact Transmissive
Photo Interrupter
(Single Phototransistor Output)
GP1S195HCPSF
GP1S195HCPSFSource: SHARP official website (https://global.sharp/products/device/lineup/selection/opto/photointr/single/index.html)
Number of models11 (as of September 2026)
Gap width1.0–3.0 mm
Slit width0.12–0.3 mm
Response time30–50 μs
MountingDirect PWB mount / surface mount (reflow-compatible)
Selectable featuresPositioning boss / positioning pin / mounting hole
Compact Reflective
Photo Interrupter
(Single Phototransistor Output)
GP2S700HCP
GP2S700HCPSource: SHARP official website (https://global.sharp/products/device/lineup/selection/opto/photointr/single/index4.html)
Number of models2 (as of September 2026)
Optimum detecting distance1 mm / 4 mm
Response time20 μs
MountingSurface mount (leadless)
Selectable featuresNot specified
Case-Type Transmissive
Photo Interrupter
(OPIC Output)
GP1A50HRJ00F
GP1A50HRJ00FSource: SHARP official website (https://global.sharp/products/device/lineup/selection/opto/photointr/opic/index2.html)
Number of models7 (5 scheduled for discontinuation; as of September 2026)
Gap width3.0–10.0 mm
Slit width0.5–1.8 mm
Propagation delay time3–5 μs
MountingPWB mounting / screw mounting (both-side mounting / side mounting)
Selectable featuresScrew holes / positioning pins / selectable output logic (HR / LR)
Reflective Photo Interrupter
with Connector
(OPIC Output)
GP2A25DJ000F
GP2A25DJ000FSource: SHARP official website (https://global.sharp/products/device/lineup/selection/opto/photointr/opic/index4.html)
Number of models13 (as of September 2026)
Optimum detecting distance2.5–15 mm
Supply voltage3.0–5.5 V
MountingScrew mounting / hook / with connector
Selectable featuresLight modulation / sensitivity adjusted / detection of multiple paper types / compatible with inverter fluorescent lamps / static electricity resistance / built-in visible-light cut filter / 3.3 V operation

About SHARP Semiconductor Innovation

SHARP Semiconductor Innovation
Source: SHARP official website (https://ssic.jp.sharp/en/)

SHARP Semiconductor Innovation, a wholly owned subsidiary of Sharp Corporation, develops electronic devices such as optical sensors, LSIs, and image sensors. Photo interrupters are used in mass-produced equipment for applications such as optical zoom control in digital cameras and optical pickup control in Blu-ray Disc recorders. In May 2026, it developed the GP2S800 series of ultra-compact analog-output reflective photo interrupters and plans to begin mass production.

Source: SHARP official website (https://global.sharp/corporate/news/260507-a.html)

Company NameSharp Semiconductor Innovation Corporation
Established2019
Headquarters Address2613-1 Ichinomoto-cho, Tenri, Nara, Japan
CertificationISO 9001 and others (obtained by Sharp Corporation’s electronic device business)
Sales NetworkThree locations in Japan, with products supplied worldwide through distributors such as element14, RS Components, Mouser, and DigiKey
Official Websitehttps://ssic.jp.sharp/en/

Photosensors for equipment integration come in several types, each using a different detection method. However, there is no single term that covers them all, so you need to check the available types for each manufacturer.

This section explains when a transmissive type is suitable and which types are appropriate for three other situations.

SCENARIO 01

The Target Can Be Positioned Between
the Emitter and Detector

Transmissive Photosensor Photo Interrupter

If the target fits within the sensor gap, a transmissive type is suitable.

Because the positions of the emitter and detector are fixed within the sensor, optical axis alignment is not required. Detection is based on whether the light is blocked, so it is generally less affected by the target’s color or surface condition than reflective sensing.

SCENARIO 02

Components Can Be Placed
on Only One Side of the Target

Reflective Photo Sensor Photo Reflector

If the target can only be detected from one side, a reflective type is suitable.

The emitter and detector are positioned on the same side, and the detector receives light reflected from the target. It can also be installed where the opposite side of the target is inaccessible, such as against a wall or deep inside a mechanism. However, because the amount of reflected light varies with the target’s color and gloss, verify with the actual target that there is sufficient margin relative to the detection threshold.

SCENARIO 03

The Target Color Varies

Area Reflective Photo Sensor Area Reflective Sensor

If a reflective type also detects the background, or if detection varies with the target’s color or surface condition, an area reflective type is suitable.

It is designed to detect objects within a defined distance range, which helps reduce unwanted detection of a background outside that range. However, because the sensing distance is fixed for each product, determine the distance to the target first.

SCENARIO 04

The Target Does Not Fit Within the Sensor Gap

Separate-Type Photo Sensor Photo Interrupter, Separate Type

If the target is too thick or wide to fit within the sensor gap, or if the emitter and detector need to be separated by tens of millimeters or more, a separate type is suitable.

Because the emitter and detector are separate components, the spacing and layout can be set freely without being constrained by a fixed gap width. However, because optical axis alignment must be handled in the equipment design, determine the mounting tolerances and method of securing the components in advance.

SHINKOH ELECTRONICS

SHINKOH ELECTRONICS official website
Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/en/)

SHINKOH ELECTRONICS is a specialist manufacturer of optical sensors founded in 1974. Drawing on its existing product designs, it can reproduce equivalents of discontinued products without starting a new design from scratch. It also offers transparent-object detection using patented technology* and a fully dustproof type designed for paper-dust environments.

*Source: SHINKOH ELECTRONICS official website, Patent No. 6866174 (https://www.landingpage-synergy.com/p464xnO9/)

Type

  • Photo Interrupter
  • Photo Reflector
  • Photo Interrupter-separate type
  • Photo Interrupter-actuator type
  • Area Reflective Sensor
Where to buy in IndiaLocal distributor (Toshniwal Sensors)
Headquarters Address2-29-30 Minami-kamonomiya, Odawara, Kanagawa, Japan
Official Websitehttps://www.shinkoh-elecs.jp/en/

TT Electronics

TT Electronics official website
Source: TT Electronics official website (https://www.ttelectronics.com/)

TT Electronics is a UK manufacturer offering these products under the Optek Technology brand. It offers fluid sensor models with dedicated slots for different tube outer diameters and has published examples of use in hemodialysis machines and infusion pumps.

Type

  • Slotted Optical Switch
  • Reflective Object Sensor
  • Fluid Sensor
Where to buy in IndiaAvailable through distributors such as element14, RS Components, Mouser, and DigiKey
Headquarters AddressFifth Floor, One George Yard, London, EC3V 9DF, United Kingdom
Official Websitehttps://www.ttelectronics.com/

SHARP Semiconductor Innovation

SHARP Semiconductor Innovation official website
Source: SHARP official website (https://ssic.jp.sharp/en/)

SHARP Semiconductor Innovation is a subsidiary responsible for Sharp’s electronic device business. Drawing on thin-profile molding technology developed over many years, it supplies ultra-compact photo interrupters used in applications such as optical zoom control in digital cameras.

Type

  • Photointerrupter Transmissive type
  • Photointerrupter Reflective type
Where to buy in IndiaAvailable through distributors such as element14, RS Components, Mouser, and DigiKey
Headquarters Address2613-1 Ichinomoto-cho, Tenri, Nara, Japan
Official Websitehttps://ssic.jp.sharp/en/

Photo interrupters may need to be replaced for a variety of reasons, including product discontinuation, longer lead times, shortages of domestic inventory, and cost constraints.

This guide explains which mechanical, optical, and electrical specifications need to be checked to determine whether an alternative part can be used in an existing design.

Photo Interrupters for
Medical & Clinical Analyzers

Photo interrupters are used to check the status of mechanisms, such as the rotor’s home position, whether a cuvette is present, and whether a door is open or closed, but the appropriate type—transmissive, reflective, or separate—depends on the sensing location. In addition, environmental conditions such as exposure to disinfectants, vibration, and ambient light, as well as the outlook for long-term product availability, factor into the selection.

When to Use a Transmissive
Photo Interrupter

In this most basic configuration, the emitter and detector are positioned facing each other, and detection occurs when the target passes between them and blocks the light. Because the signal change is large and the threshold is easy to set, it is the first choice when the emitter and detector can be positioned opposite each other.

This page outlines the operating principle, advantages and limitations, and differences from the reflective type.

When to Use a Reflective
Photo Interrupter

In this configuration, the emitter and detector are positioned side by side on the same side, and the detector receives light reflected from the target. It is considered an alternative to the transmissive type when positioning the emitter and detector opposite each other is difficult or when space is limited.

This page explains the operating principle, typical applications, and how to choose between it and the transmissive type.

Selected by problem Three Photo Interrupter
Manufacturers