3 Top Photo Interrupter
Manufacturers

Photo Interrupter Replacement

End-of-life (EOL) notices, lead times too long for production schedules, local stock shortages, and cost-reduction requests can all prompt consideration of replacing a photo interrupter. This article explains how to check compatibility and which specifications to compare.

How to Confirm Compatibility

To check compatibility, see whether the manufacturer of the discontinued part officially recommends a successor or replacement. You can also ask potential manufacturers directly whether they have a product compatible with the original part number. Distributor search tools, such as DigiKey’s Cross Reference Tool, can help identify possible replacement parts, but their results are for reference only and do not confirm compatibility.

In order of priority, there are four replacement options:

  1. Re-sourcing the same part number (different distributor or lot)
  2. A manufacturer-recommended successor part
  3. An equivalent part from the same manufacturer
  4. An alternative part from another manufacturer

What to Check
for Compatibility

Category Check items
Mechanical External dimensions, mounting footprint, slot width, gap, aperture position, and lead arrangement or SMD pad layout
Optical Detection method (transmissive / reflective), sensing distance, and response characteristics
Electrical Terminal arrangement, output type (phototransistor / Photo IC / logic), supply voltage, and forward current

What a Cross-Reference Does Not Tell You

Even if a part is listed as “equivalent,” the lead pitch, aperture position, and response time may differ. A manufacturer’s official cross-reference is a reliable source for finding a successor within the same product family, but it does not show products from other manufacturers.

Availability in India

Once you have identified a potentially compatible part, the next step is to obtain samples for evaluation. element14 and RS Components offer pricing for the Indian market with import duties included, and their relatively simple ordering procedures make them suitable for small sample orders. Mouser and DigiKey offer a wide range of products, but orders involve import procedures and shipping charges, so it is important to allow sufficient lead time.

Getting Samples
and Support in India

If a manufacturer has a local branch or distributor in India, you can make inquiries or request samples directly. Before approving a part for mass production, be sure to check not only technical compatibility but also the product’s lifecycle and supply status.

Before You Approve
a Replacement

Before approving a replacement, review the datasheets for both the original and candidate parts. Rather than relying solely on distributors’ cross-reference data, it is important to evaluate samples in your actual circuit and mounting environment wherever possible.

NEXT STEPFind a
Photo Interrupter Manufacturer
That Fits Your Design

When selecting a photo interrupter, you may encounter requirements that standard products cannot meet. This site carefully selects manufacturers with proven experience in meeting specialized sensing and procurement requirements and compares their product lineups, key specifications, and availability in India. Use this information to help choose a manufacturer.

[Advertisement]Photo Interrupter Manufacturers
for 3 Specific
Design Challenges

This section looks at three design challenges that standard parts often struggle to address and introduces one manufacturer suited to each. All three are manufacturers whose products are confirmed to be carried by distributors or sales agents in India.

Advertiser Disclosure: We receive compensation from some of the companies listed below. This compensation may affect which companies are included and the order in which they appear.

No Replacement for a Discontinued or Hard-to-Source Part
SHINKOH
ELECTRONICS
SHINKOH ELECTRONICS
Source: SHINKOH ELECTRONICS official website (https://www.shinkoh-elecs.jp/en/)
Even Discontinued Parts
from Other Manufacturers
Can Be Recreated

Because SHINKOH ELECTRONICS designs both the emitter and detector in-house, it can reproduce parts with dimensions and characteristics close to the original, helping avoid PCB redesign and recertification.

Get a Near-Custom Fit
to Keep Costs Down

As a specialist optical sensor manufacturer, SHINKOH ELECTRONICS maintains designs spanning 50 years of products.* Its broad current and legacy product range makes it possible to find a near-custom fit without developing a fully custom part, which can help keep costs down.

Sourcing

Where to buy in IndiaLocal distributor (Toshniwal Sensors)
SamplesAvailable
Unable to Reliably Detect Liquid
or Air Bubbles in Tubing
TT
Electronics
TT Electronics
Source: TT Electronics official website (https://www.ttelectronics.com/products/sensors/optoelectronics/fluid-sensors/opb350/)
Arc-Shaped Slots
Hold the Tubing Securely
to Keep the
Sensing Position Stable

Models are available for tube outer diameters of 1.6, 3.2, 4.8, and 6.3 mm, with arc-shaped slots sized to match each diameter, helping keep the sensing position stable.

Detect Liquid, Air Bubbles,
and Tube Detachment
with a Single Sensor

TT Electronics’ fluid sensors have been used in hemodialysis machines and infusion pumps. With an additional decision circuit, the sensor can distinguish liquid presence or absence, passing air bubbles, and the absence of a tube, and can also detect tube detachment.

Sourcing

Where to buy in Indiaelement14 / RS / Mouser / DigiKey
SamplesAvailable
No Standard Part Fits
in a Tight Enclosure
SHARP
Semiconductor Innovation
SHARP Semiconductor Innovation
Source: SHARP official website (https://global.sharp/corporate/news/100924.html)
Ultra-Compact SMD
Fits in the Space Between
the PCB and Mechanism

At just 2.26 × 1.4 × 1.6 mm, its surface-mount design means no leads protrude from the back of the PCB. It fits entirely in the space between the PCB and mechanism, allowing a sensor to be added without changing the enclosure thickness.

Compact Design with
a Narrow Sensing Area
to Detect
Small Objects
and Fine Features

With its 0.12 mm slit width and small sensing area, it can detect the position of small moving parts such as a lens, allowing the flag on the mechanism to be made smaller.

Sourcing

Where to buy in Indiaelement14 / RS / Mouser / DigiKey
SamplesContact for availability

*Source: SHINKOH ELECTRONICS official website, as of September 2026
(https://www.landingpage-synergy.com/p464xnO9/)

Comparison of Capabilities
Across the 3 Manufacturers
SHINKOH ELECTRONICS TT Electronics SHARP Semiconductor Innovation
Gap width range 2–15 mm 2.03–32.0 mm 1.0–10.0 mm
Slit width range 0.2–2 mm 0.076–1.52 mm 0.12–1.8 mm
Mounting method Direct PCB mount / surface mount (reflow) / snap-in connector / screw-mount connector / screw-mount harness PCB mount / panel mount / screw mount / wire leads (24", 26 AWG) / free-hanging PWB through-hole / surface mount (reflow) / snap-in connector / case type with screw holes
Environmental options Dust resistance / drip resistance / visible-light blocking Dust resistance / ambient-light protection Not specified on the official website
Example applications ATMs, analytical instruments, inspection equipment Portable hemodialysis machines, infusion pumps Digital cameras, Blu-ray recorders
Customization Available Available Contact for availability
Selected by problem Three Photo Interrupter
Manufacturers