A transmissive photo interrupter is a non-contact optical sensor that detects an object’s presence, position, or movement when it passes between an emitter and detector facing each other and blocks the light beam.
This article explains its operating principle, structure, main applications, features, and key selection criteria.
It is a sensor with an emitter (LED) and a detector (such as a phototransistor) positioned opposite each other. The target passes between the emitter and detector, and the sensor detects it when it blocks the light beam. The space between the two elements is called the gap or slot.
The name for the transmissive type differs by manufacturer. Four of the six manufacturers listed below use names based on Photo Interrupter, while OMRON uses Photo Microsensor and TT Electronics uses Slotted Switch. Adding terms such as “Slot type” to your parts search can help you avoid overlooking suitable products.
| Shinkoh Electronics | Photo Interrupter |
|---|---|
| ROHM | Transmission Type Photo Interrupter |
| KODENSHI | Transmission Type Photo Interrupter |
| Sharp Corporation | Photo Interrupter (Transmissive Type) |
| OMRON (Now Aratas Corporation) | Photo Microsensor (Transmissive) |
| TT Electronics (OPTEK) | Slotted Switch / Slotted Optical Switch |
A transmissive photo interrupter detects whether a target is present based on whether light from the LED reaches the detector. When nothing is in the gap, light reaches the detector, and the output indicates “no detection.” When a light-blocking plate or sheet of paper enters the gap and blocks the light beam, the amount of light received drops sharply, and the output switches to “detection.”
Because detection is largely based on whether light reaches the detector, the detection threshold is easier to set and false detection is less likely.
| Position detection | Slit disk, carriage, moving part | Detection of the home position, rotational position, and end positions of moving parts |
|---|---|---|
| Paper and sheet detection | Paper, opaque sheets | Paper feed and ejection checks, paper presence detection, and jam detection |
| Rotation and motion detection | Shutter plate, slit disk | Rotation counting and operation timing generation |
To learn how photo interrupters can be used in the equipment you are designing, see the articles below on applications in printers, ATMs, and medical analyzers.
Transmissive photo interrupters are well suited to detecting moving parts in mechanisms, but their placement options are limited. Before adopting this type, consider its advantages and limitations in detail.
| Comparison item | Transmissive | Reflective |
|---|---|---|
| Detection method | Detects by blocking light | Detects using light reflected from the target |
| Target position | Between the emitter and detector | In front of the sensor |
| Mechanism layout | Opposed placement across the target | One-sided placement |
| Alignment | The emitter and detector positions are fixed within the sensor. A mechanism is needed to guide the target through the gap | The distance and angle to the target must be set during equipment design, and sensitivity adjustment may be required |
| Main applications | Paper-feed detection, rotation counting, and home-position detection | Paper-presence detection, mark reading, and proximity detection |
First, check whether the emitter and detector can be positioned on opposite sides of the target. If this is not possible, a reflective type is an option. If both can be positioned, a useful guideline is to choose a transmissive type for reliable detection or a reflective type to save space.
| Slot width (gap width) | Whether the target’s thickness and travel range fit within the gap |
|---|---|
| Slit width | Whether it matches the position-detection resolution you need |
| Output type | Whether the sensor has a phototransistor or photo IC (logic) output and is compatible with the connected circuit |
| Response time | Whether the sensor can respond quickly enough to the target’s movement or rotation |
| Mounting method | Which mounting method suits the equipment: direct PCB mounting, surface mounting, connector connection, or screw mounting |
When checking the sensor’s dimensions, check not only its width and height but also the slot depth (the length along the optical axis). This helps reduce the risk of interference as the target passes through.
If the emitter and detector can be positioned on opposite sides of the target and the target is opaque, a transmissive type is the first choice. If only one-sided sensor placement is possible, the target is transparent, or detection is needed at a distance, compare other sensing methods, such as reflective or separate (through-beam) types.
If these conditions appear to be met, comparing manufacturers and products against your specific requirements can help narrow down the options.
NEXT STEPFind a
Photo Interrupter Manufacturer
That Fits Your Design
When selecting a photo interrupter, you may encounter requirements that standard products cannot meet. This site carefully selects manufacturers with proven experience in meeting specialized sensing and procurement requirements and compares their product lineups, key specifications, and availability in India. Use this information to help choose a manufacturer.
This section looks at three design challenges that standard parts often struggle to address and introduces one manufacturer suited to each. All three are manufacturers whose products are confirmed to be carried by distributors or sales agents in India.
Advertiser Disclosure: We receive compensation from some of the companies listed below. This compensation may affect which companies are included and the order in which they appear.

Because SHINKOH ELECTRONICS designs both the emitter and detector in-house, it can reproduce parts with dimensions and characteristics close to the original, helping avoid PCB redesign and recertification.
As a specialist optical sensor manufacturer, SHINKOH ELECTRONICS maintains designs spanning 50 years of products.* Its broad current and legacy product range makes it possible to find a near-custom fit without developing a fully custom part, which can help keep costs down.
Sourcing
| Where to buy in India | Local distributor (Toshniwal Sensors) |
|---|---|
| Samples | Available |

Models are available for tube outer diameters of 1.6, 3.2, 4.8, and 6.3 mm, with arc-shaped slots sized to match each diameter, helping keep the sensing position stable.
TT Electronics’ fluid sensors have been used in hemodialysis machines and infusion pumps. With an additional decision circuit, the sensor can distinguish liquid presence or absence, passing air bubbles, and the absence of a tube, and can also detect tube detachment.
Sourcing
| Where to buy in India | element14 / RS / Mouser / DigiKey |
|---|---|
| Samples | Available |

At just 2.26 × 1.4 × 1.6 mm, its surface-mount design means no leads protrude from the back of the PCB. It fits entirely in the space between the PCB and mechanism, allowing a sensor to be added without changing the enclosure thickness.
With its 0.12 mm slit width and small sensing area, it can detect the position of small moving parts such as a lens, allowing the flag on the mechanism to be made smaller.
Sourcing
| Where to buy in India | element14 / RS / Mouser / DigiKey |
|---|---|
| Samples | Contact for availability |
*Source: SHINKOH ELECTRONICS official website, as of September 2026
(https://www.landingpage-synergy.com/p464xnO9/)
| SHINKOH ELECTRONICS | TT Electronics | SHARP Semiconductor Innovation | |
|---|---|---|---|
| Gap width range | 2–15 mm | 2.03–32.0 mm | 1.0–10.0 mm |
| Slit width range | 0.2–2 mm | 0.076–1.52 mm | 0.12–1.8 mm |
| Mounting method | Direct PCB mount / surface mount (reflow) / snap-in connector / screw-mount connector / screw-mount harness | PCB mount / panel mount / screw mount / wire leads (24", 26 AWG) / free-hanging | PWB through-hole / surface mount (reflow) / snap-in connector / case type with screw holes |
| Environmental options | Dust resistance / drip resistance / visible-light blocking | Dust resistance / ambient-light protection | Not specified on the official website |
| Example applications | ATMs, analytical instruments, inspection equipment | Portable hemodialysis machines, infusion pumps | Digital cameras, Blu-ray recorders |
| Customization | Available | Available | Contact for availability |